HERE IS THE SHEPHERD LAW OF ZEROS:
"IN
ORDER FOR THE SCOPE TO BE GUILTY OF SCATTERED OR BAD GROUPS SOMETHING INSIDE, BETWEEN THE RETICLE AND THE TARGET, MUST
MOVE!"
AS YOU CAN SEE BY THE IMAGE ABOVE THERE ARE 4 LENSES BETWEEN THE
RETICLE AND THE TARGET. IF ANY ONE OF THESE LENSES MOVE, YOUR POINT OF IMPACT WILL CHANGE IN THE SCOPE.
IN A VARIABLE POWER SCOPE THERE ARE ABOUT 23 PIECES THAT CAN SHAKE LOOSE AND MOVE ANY ONE OF THE 4 LENSES AND
THE CROSS-HAIR. IF THAT HAPPENS YOUR "OLD TYPE" SCOPE RETICULE WILL LOOK LIKE THIS.....
YOU CAN'T TELL BY LOOKING AT THEIRS' . BUT........
WITH
A SHEPHERD YOU CAN!!
WITH THE SHEPHERD PATENTED DUAL RETICLE SYSTEM YOU HAVE A TREMENDOUS ADVANTAGE OVER THE
"OLD TYPE" SCOPE.
AS YOU CAN SEE BY THE DRAWING ABOVE, OUR SCOPE CROSS HAIR ALSO HAS
THE FOUR LENSES BETWEEN IT AND THE TARGET AND CAN ALSO BE KNOCKED OUT OF ZERO BY MOVEMENT OF THESE LENSES UNDER RECOIL, ETC.
HOWEVER OUR RETICLE WITH THE CIRCLES HAS ONLY ONE LENS BETWEEN IT AND THE TARGET.
THAT MAKES THIS RETICLES' ZERO ALMOST INDESTRUCTABLE. IT IS MORE RELIABLE THAN EVEN THE MOST EXPENSIVE 30 MM TUBE COMBAT
SCOPE, SINCE IT HAS FEWER PARTS THAT CAN KNOCK IT
OUT OF ZERO.
IN ADDITON TO THIS STABILITY THERE IS THE FACT THAT ZOOMING THE SCOPE'S POWER UP OR DOWN
HAS ABSOLUTELY NO EFFECT ON THIS RETICLE. IT CAN'T BECAUSE THE ZOOM LENSES ARE
NOT BETWEEN THE RETICLE AND THE TARGET. AS A MATTER OF FACT IF YOU COULD LOCK THE SCOPE'S TUBE FROM THE CENTER
OF THE SADDLE BACK, SO THE FRONT HALF OF THE SCOPE WOULD NOT MOVE, AND USE A PIPE WRENCH TO BEND THE REAR OF THE SCOPE AS
FAR AS YOU LIKE, YOU WOULDN'T CHANGE THE ZERO ON THE CIRCLES. AS LONG AS YOU COULD SEE THE CIRCLES YOU
COULD AIM AND HIT WITH THEM.
NOW YOU CAN "LOOK IN YOUR SCOPE AND TELL AT A GLANCE
IF IT IS READY TO GO".... OUR PATENTED SYSTEM WILL TELL YOU.
Click here to find out about Shepherd Scopes in the UK and why you can't be without one.